Alligator | 12-Pack Sens.It RS+ Dual Frequency Universal TPMS Sensor - Metal (591132) or Rubber (591134)

Alligator | 12-Pack Sens.It RS+ Dual Frequency Universal TPMS Sensor - Metal (591132) or Rubber (591134)

   Limited Time Offer Ends - Tue 9/30/2025  

Alligator 591132 Sens.It RS+ Dual Frequency Universal TPMS Sensor

Alligator Sens.it RS+ TPMS Sensors lead the industry with 99.7% coverage and 100% OE mimic functionality. The RS+ Dual Frequency TPMS Sensor is compatible with all leading programming tools and backed by US-based technical support.

Simplicity: Sens.it RS+ TPMS sensors just work. Simple as that. They’re a snap to install and easy to program with our premium tools or your own.

99.7% Vehicle Coverage: Nobody talks to more vehicles than our innovative Sens.it RS+ TPMS sensors. Our industry-leading sensors cover 99.7% of vehicles.

Functionality: Don’t let our simple sensor design fool you. Whether programmed or cloned, Sens.it RS+ TPMS sensors replicate full OEM functionality.

Call 855-573-6748 for Support: Our US-based tech support is here anytime you need to talk, and all of our products are backed by 100 years of innovative German engineering.

The Sens.it RS+ sensor corresponds to the original tire pressure sensors in terms of functionality and quality. The aluminum valve used in the original equipment and the currently smallest tire pressure sensor for metal valves are connected to each other by means of the ALLIGATOR patented ball joint. The ball joint makes it possible to mount the sensor flexibly on most steel and aluminum rims. The aluminum valve is made of a high-quality aluminum alloy and is protected against corrosion by an additional anodized coating.

Specifications:

The Sens.it RS+ sensor corresponds to the original tire pressure sensors in terms of functionality and quality. The Sens.it RS+ for snap-in valves can be used for:

• Tires up to speed index H
• Wheels where the valve deflection can be limited to a maximum angle of 25°

The Sens.it Snap-In valve is mounted into the rim like a conventional rubber valve or removed accordingly. Snap-In valves for tire pressure sensors are exposed to significantly higher loads than standard valves. Therefore, it is necessary to supplement TPMS Snap-In valves basically at every tire change. The following recommendations must be observed:

• The TPMS Snap-In Valve for the Sens.it Universal Sensor RS+ is limited to speeds below 130.5 mph
• It must be ensured that the tire inflation pressure does not exceed 65 psi
• In case of doubt, it is recommended to use the Sens.it RS+ Universal Sensor with Clamp-In valve (SKU: 591132)

Compliance and Restrictions
⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov