Plombco | StickPro Steel 1/2 oz Stick-On Adhesive Tape Wheel Weight (408Fe-28)

Plombco StickPro Steel 1/2 oz Stick-On Adhesive Tape Wheel Weight (408Fe-28)

When balancing a wheel, the technician must use the correct tape weight in order to properly fit the rim. All of the tape weights we offer come with extremely strong tape that sticks to the rim better, which results in a better balanced wheel.

Cold weather (CW) variant allows for exceptional adherence in cold temperatures, as low as 15 degrees F (-10 degrees Celsius). Cold weather variant is denoted by a gray foam carrier and blue snowflake pattern.

PLOMBCO OFFERS 2 DIFFERENT ADHESIVES TO COVER ALL APPLICATIONS

Standard

• For general purpose
• Widely used in North America
• White foam carrier

Cold Weather (CW)

• Exceptional adherence in cold temperatures, as low as 15°^F/-10°^C
• Widely used in coldest countries
• Grey foam carrier

For Everyday Application

• Low profile 1/2 oz segments
• Width 3/4"
• Length 6"
• High corrosion resistance
• Tapered segment design for a better contour
• Sold as 28 strips
• 8 Segments per Strip

Instructions:

1. Clean: Clean the area where the wheel weight is to be applied using a rim/wheel cleaner. To do so, spray the area thoroughly and then wipe with a clean soft cloth. 
2. Contour: If the wheel weight is not pre-contoured follow the instructions below; otherwise, skip to step 3. Before removing the liner, apply the weight against the wheel and using your fingers gently contour the shape to the radius of the wheel.
3. Remove the liner: Remove the liner and avoid touching the exposed adhesive. 
4. Apply: Using your fingers, apply a uniform pressure throughout the surface (do not use a hammer).

Compliance and Restrictions:

⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov