Rubber Snap-In TPMS Valve - Ram Square End
The OEM recommends replacing the rubber snap-in TPMS valve whenever the sensor is removed from the wheel. The rubber snap-in valve is attached to the sensor module by a TORX screw with a recommended torque specification of 11.5 in-lbs or 1.3 N.m.
- Maximum cold inflation pressure is 90 psi
- Check the TPMS Finder to Ensure It Fits Your Vehicle
- Box Quantity: 10 Pieces
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.