Plombco StickPro Steel 1/4 oz Stick-On Adhesive Tape Wheel Weight (312Fe-52)
While balancing a wheel, the technician must use the correct tape weight in order to fit the rim properly. All of the tape weights we offer come with strong tape to stick to the rim better when balancing a wheel.
Cold weather (CW) variant allows for exceptional adherence in cold temperatures, as low as 15 degrees F (-10 degrees Celsius). Cold weather variant is denoted by a gray foam carrier and blue snowflake pattern.
PLOMBCO OFFERS 2 DIFFERENT ADHESIVES TO COVER ALL APPLICATIONS
Standard
- For general purpose
- Widely used in North America
- White foam carrier
Cold Weather (CW)
- Exceptional adherence in cold temperatures, as low as 15°F/-10°C
- Widely used in coldest countries
- Grey foam carrier
For Everyday Application
- Low profile 1/4 oz segments
- Width 3/4"
- Length 7 1/4"
- High corrosion resistance
- Tapered segment design for a better contour
- Sold as 52 strips
- 12 Segments per Strip
Instructions:
- Clean: Clean the area where the wheel weight is to be applied using rim/wheel cleaner. To do so, spray the area thoroughly and then wipe with a clean soft cloth.
- Contour: If the wheel weight is not pre-contoured follow the instructions below; otherwise, skip to step 3. Before removing the liner, apply the weight against the wheel and using your fingers gently contour the shape to the radius of the wheel.
- Remove the liner: Remove the liner and avoid touching the exposed adhesive.
- Apply: Using your fingers, apply a uniform pressure throughout the surface (do not use a hammer).
Compliance and Restrictions
⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
