Plombco | StickPro Steel 1/4 oz Stick-On Adhesive Tape Wheel Weight (312FE-52)

Plombco StickPro Steel 1/4 oz Stick-On Adhesive Tape Wheel Weight (312Fe-52)

While balancing a wheel, the technician must use the correct tape weight in order to fit the rim properly. All of the tape weights we offer come with strong tape to stick to the rim better when balancing a wheel.

For Everyday Application

• Low profile 1/4 oz segments
• Width 3/4"
• Length 7 1/4"
• High corrosion resistance
• Tapered segment design for a better contour
• Sold as 52 strips
• 12 Segments per Strip

Instructions:

1. Clean: Clean the area where the wheel weight is to be applied using rim/wheel cleaner. To do so, spray the area thoroughly and then wipe with a clean soft cloth. 
2. Contour: If the wheel weight is not pre-contoured follow the instructions below; otherwise, skip to step 3. Before removing the liner, apply the weight against the wheel and using your fingers gently contour the shape to the radius of the wheel.
3. Remove the liner: Remove the liner and avoid touching the exposed adhesive. 
4. Apply: Using your fingers, apply a uniform pressure throughout the surface (do not use a hammer).

⚠️WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov